Protocol for 3D Printing Masks

From P2P Foundation
Revision as of 13:07, 22 March 2020 by Mbauwens (talk | contribs) (Created page with " * Document:PROTOCOL FOR 3D PRINTING MASKS. DRAFT DOCUMENT, UNDER TEST. K. Grammatis | fb: @iamkosta | t: @kgram | ig: @kgrammatis https://docs.google.com/document/d/1eTjQZ5n...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Document:PROTOCOL FOR 3D PRINTING MASKS. DRAFT DOCUMENT, UNDER TEST. K. Grammatis | fb: @iamkosta | t: @kgram | ig: @kgrammatis

https://docs.google.com/document/d/1eTjQZ5nbopPLF8p5YHUBWkz88FwsQfKO7OeqzDDsar0/edit (Permalink: http://kosta.is/covid)

Description

This protocol details using a conventional FDM 3D printer to create face masks that aim to be similar in performance to N95 masks - which are in short supply around the world.

This protocol uses a MERV 13 (or higher) / HEPA air conditioning / HVAC filter to remove particles from air. These can filter out 0.3 microns particle size, which is the same as the N95 mask. Any HEPA filter can be used if made to fit in the mask. As limited testing has been done the efficacy of this design is not yet determined, USE AT YOUR OWN RISK. For questions / concerns please leave a comment.