Difference between revisions of "Free and Open-Source Control Software for 3-D Motion and Processing"

From P2P Foundation
Jump to navigation Jump to search
Line 1: Line 1:
 
[[image:franklin.png|right]]
 
[[image:franklin.png|right]]
'''Franklin''' is a [[RepRap]] driver developed by [[User:Wijnen]]. This is software for controlling a [[RepRap]] 3-D printer, created by the [[Michigan Tech Open Sustainable Technology Lab]] (MOST).
+
'''Franklin''' is a [[RepRap]] driver developed by [http://www.appropedia.org/User:Wijnen User:Wijnen]. This is software for controlling a [[RepRap]] 3-D printer, created by the [http://www.appropedia.org/Category:MOST Michigan Tech Open Sustainable Technology Lab] (MOST).
  
  
Line 10: Line 10:
 
Please see the wiki on github for up to date information.
 
Please see the wiki on github for up to date information.
 
==Instructions==
 
==Instructions==
* [[Franklin:MOST]]
+
* [http://www.appropedia.org/Franklin:MOST Franklin:MOST]
 
*  To install Franklin on [[Debian]] you can also follow the video - it will take about 5 min. [http://most.mse.mtu.edu/franklin-install.avi video]
 
*  To install Franklin on [[Debian]] you can also follow the video - it will take about 5 min. [http://most.mse.mtu.edu/franklin-install.avi video]
 
Please see the wiki on github for up to date information.
 
Please see the wiki on github for up to date information.
Line 19: Line 19:
  
 
===Keywords===
 
===Keywords===
[[3-D printing]], [[additive manufacturing]], [[distributed manufacturing]], firmware, [[free and open source software]], FOSS, open-source, open-source electronics, [[open-source hardware]], personal fabrication, printing, [[RepRap]], rapid prototyping
+
[http://www.appropedia.org/3-D_printing 3-D printing], [http://www.appropedia.org/3-D_printing additive manufacturing], [http://www.appropedia.org/Distributed_manufacturing distributed manufacturing], firmware, [http://www.appropedia.org/Open_source_software free and open source software], FOSS, open-source, open-source electronics, [[open-source hardware]], personal fabrication, printing, [[RepRap]], rapid prototyping
  
 
==See Also==
 
==See Also==

Revision as of 17:20, 27 February 2017

Franklin.png

Franklin is a RepRap driver developed by User:Wijnen. This is software for controlling a RepRap 3-D printer, created by the Michigan Tech Open Sustainable Technology Lab (MOST).


Source

  • Wijnen, B., Anzalone, G. C., Haselhuhn, A.S., Sanders, P.G., Pearce, J. M. Free and Open-source Control Software for 3-D Motion and Processing. Journal of Open Research Software, 4: e2, DOI: http://dx.doi.org/10.5334/jors.78 free access

Download

Latest version: https://github.com/mtu-most/franklin Please see the wiki on github for up to date information.

Instructions

Please see the wiki on github for up to date information.

  • Franklin was tested on the following RepRap devices: Mendel RepRap, Delta RepRap, OS laser welder, PCB micromill, and the open source metal 3-D printer.

Abstract

RepRap 3-D printers and their derivatives using conventional firmware are limited by: 1) requiring technical knowledge, 2) poor resilience with unreliable hardware, and 3) poor integration in complicated systems. In this paper, a new control system called Franklin, for CNC machines in general and 3-D printers specifically, is presented that enables web-based three dimensional control of additive, subtractive and analytical tools from any Internet connected device. Franklin can be set up and controlled entirely from a web interface; it uses a custom protocol which allows it to continue printing when the connection is temporarily lost, and allows communication with scripts.

Keywords

3-D printing, additive manufacturing, distributed manufacturing, firmware, free and open source software, FOSS, open-source, open-source electronics, open-source hardware, personal fabrication, printing, RepRap, rapid prototyping

See Also

In the News